[42] BODY - - DOOR - DOOR HANDLE AND LATCH - REMOVAL AND INSTALLATIONPRINT PAGE / INDEX / PRIOR / NEXT
DOOR HANDLE AND LATCH
REMOVAL AND INSTALLATION
Pre-removal Operation
  • Door Trim Assembly Removal (Refer to GROUP 52A, Door Trim ).
Post-installation Operation
  • Door Inside Handle Play Adjustment (Refer to ).
  • Door Outside Handle Play Check (Refer to ).
  • Door Trim Assembly Installation (Refer to GROUP 52A, Door Trim ).

   



Door handle and door latch assembly removal steps

>>C<<
 1.
 Door inside handle


•
 Waterproof film (Refer to .)

>>B<<
 2.
 Lower sash


3.
 Door outside handle


4.
 Door lock key cylinder


5.
 Screw


6.
 Door latch assembly


7.
 Inside lock cable <Front door>


8.
 Inside lock rod <Rear door>


9.
 Inside handle rod


10.
 Outside handle rod



Door check removal steps


•
 Waterproof film (Refer to .)

>>A<<
 11.
 Door check

INSTALLATION SERVICE POINTS
>>A<< DOOR CHECK INSTALLATION
   
Install the door check so that the identification mark faces upwards.
ITEM
 IDENTIFICATION MARK
Front Door
 Left door
 39L
Right door
 39R
Rear Door
 Left door
 40L
Right door
 40R
>>B<< LOWER SASH INSTALLATION
Insert the lower sash into the window rear sash (at door) securely.
>>C<< DOOR INSIDE HANDLE INSTALLATION
When connecting the inside cable <Front door> or the inside rod <Rear door> to the door inside handle, ensure that the door latch and the inside handle are unlocked.
[42] BODY - - DOOR - DOOR HANDLE AND LATCH - REMOVAL AND INSTALLATIONPRINT PAGE / INDEX / PRIOR / NEXT
©2004 Mitsubishi Motors Corporation