FRONT DOOR LOCK ACTUATOR CHECK
   
ACTUATOR OPERATION CHECK
LEVER POSITION
BATTERY CONNECTION
LEVER OPERATION
At the "LOCK" position
  • Connect terminal No.4 and the negative battery terminal.
  • Connect terminal No.6 and the positive battery terminal.
The lever moves from the "LOCK" position to the "UNLOCK" position.
At the "UNLOCK" position
  • Connect terminal No.6 and the negative battery terminal.
  • Connect terminal No.4 and the positive battery terminal.
The lever moves from the "UNLOCK" position to the "LOCK" position.
ACTUATOR SWITCH CHECK <LEFT SIDE (LH DRIVE VEHICLES)>
LEVER POSITION
TESTER CONNECTION
SPECIFIED CONDITION
At the "LOCK" position
1 - 2
Less than 2 ohms
At the "UNLOCK" position
1 - 3
Less than 2 ohms
ACTUATOR SWITCH CHECK <RIGHT SIDE (RH DRIVE VEHICLES)>
LEVER POSITION
TESTER CONNECTION
SPECIFIED CONDITION
At the "LOCK" position
2 - 3
Less than 2 ohms
At the "UNLOCK" position
1 - 3
Less than 2 ohms
REAR DOOR LOCK ACTUATOR CHECK
   
ACTUATOR OPERATION CHECK
LEVER POSITION
BATTERY CONNECTION
LEVER OPERATION
At the "LOCK" position
  • Connect terminal No.4 and the negative battery terminal.
  • Connect terminal No.6 and the positive battery terminal.
The lever moves from the "LOCK" position to the "UNLOCK" position.
At the "UNLOCK" position
  • Connect terminal No.6 and the negative battery terminal.
  • Connect terminal No.4 and the positive battery terminal.
The lever moves from the "UNLOCK" position to the "LOCK" position.
   
<RIGHT SIDE (LH DRIVE VEHICLES)>
SWITCH POSITION
TESTER CONNECTION
SPECIFIED CONDITION
LOCK
1 - 2
Less than 2 ohms
NEUTRAL (OFF)
1 - 2, 2 - 3
Open circuit
UNLOCK
2 - 3
Less than 2 ohms
<LEFT SIDE (RH DRIVE VEHICLES)>
SWITCH POSITION
TESTER CONNECTION
SPECIFIED CONDITION
LOCK
2 - 3
Less than 2 ohms
NEUTRAL (OFF)
1 - 2, 2 - 3
Open circuit
UNLOCK
1 - 2
Less than 2 ohms
©2004 Mitsubishi Motors Corporation