[42] BODY - - KEYLESS ENTRY SYSTEM - TRANSMITTER - DISASSEMBLY AND REASSEMBLYPRINT PAGE / INDEX / PRIOR / NEXT
TRANSMITTER
DISASSEMBLY AND REASSEMBLY
Post-installation operation
  • Transmitter operation check

   



Disassembly steps


1.
 Screw


2.
 Upper cover


3.
 Transponder <Vehicles with immobiliser>


4.
 Transmitter assembly
<<A>>
 >>A<<
 5.
 Battery


6.
 Master key

DISASSEMBLY SERVICE POINT
<<A>> BATTERY REMOVAL
 CAUTION
 Do not allow water or dust to enter the inside of the transmitter assembly when it is open. Also, do not touch the precision electronic device.
REASSEMBLY SERVICE POINT
>>A<< BATTERY INSTALLATION
 CAUTION
 Do not allow water or dust to enter the inside of the transmitter assembly when it is open. Also, do not touch the precision electronic device.
   
Install a new battery to the transmitter assembly with its (+) side facing towards the upper cover side.
Battery required for replacement: Coin type battery CR1616
[42] BODY - - KEYLESS ENTRY SYSTEM - TRANSMITTER - DISASSEMBLY AND REASSEMBLYPRINT PAGE / INDEX / PRIOR / NEXT
©2004 Mitsubishi Motors Corporation