)
- Place a wooden board about 10 mm thick as shown. Then, raise the window glass.
- Check that the window lowers by about 150 mm when the window clamps the board. If this doesn’t happen, carry out troubleshooting. Refer to GROUP 54B, Troubleshooting
, refer to GROUP 54C, Troubleshooting , refer to GROUP 54D, Troubleshooting or refer to GROUP 54E, Troubleshooting .
NOTE: If the anti-trap function (safety mechanism) is activated consecutively three times or more, make the power window switch learn the fully closed position of the power window (Refer to ).
).