IDLE-UP
OPERATION CHECK
- Before inspection and adjustment, set vehicle in the following condition:
- Engine coolant temperature: 80 -
90
°C - Lamps, electric cooling fan and accessories: Set to OFF
- Transmission: Neutral ("N" or "P" for vehicles with A/T)
- Steering wheel: Straightforward
- Check whether or not the idle speed is the standard value.
Refer to GROUP 11A, On-vehicle Service - IDLE SPEED CHECK
. <2000>
Refer to GROUP 11A, On-vehicle Service - IDLE SPEED AND IDLE MIXTURE CHECK AND AJUSTMENT. <2400-except MIVEC>
Refer to GROUP 11E, On-vehicle Service - IDLE SPEED CHECK. <2400-MIVEC>
Standard value: 700 ±
100 r/min
- When the A/C is running after turning the A/C switch to ON, and the blower switch to the 3(MH) or 4(HI) position, check to be sure that the idle speed is at the standard value.
Standard value: 850 ±
100 r/min
NOTE: It is not necessary to make an adjustment, because the idling speed is automatically adjusted
by the ISC system. If, however, a deviation from the standard value occurs for some reason,
check the ISC system.