)
)
)
- Set the heater control assembly’s blower vent changeover knob to the DEF position.
- Set the heater unit’s blower vent changeover damper relay to the DEF position (turn the damper relay to the left until it stops) and install the cable.
- Set the mode locator to the heater unit case and secure with a clip.
)
)
- Turn the heater control assembly’s temperature adjustment knob all the way to the HOT side.
- Set the heater unit’s air mix door lever to the MAX HOT position (turn the damper lever as the left illustration) and attach the cable.
- Set the mode locator to the heater unit case and secure with a clip.