COOLING TEMPRATURE SWITCH
CAUTION)
- Dip the metal part of the cooling temperature switch into engine oil and increase the oil temperature using a gas burner or similar.
)
)
- When the oil temperature reaches the standard value, check that voltage is supplied between the terminals.
Standard value:
<2400-except MIVEC>
<2400-except MIVEC>
Item
|
Temperature
|
| Less than 2 ohms |
Slightly below |
| No continuity |
NOTE: When the oil temperature is 150°C or more and there is no continuity, the resistance will not be 2Ω
or lower until the oil temperature reduces to 120°C or less.
<2400-MIVEC>
Item
|
Temperature
|
| Less than 2 ohms |
Slightly below |
| No continuity |
NOTE: When the oil temperature is 155°C or more and there is no continuity, the resistance will not be 2Ω
or lower until the oil temperature reduces to 125°C or less.