[55A] HEATER, AIR CONDITIONER AND VENTILATION - - ON-VEHICLE SERVICE - SIMPLE INSPECTION OF THE A/C PRESSURE SENSORPRINT PAGE / INDEX / PRIOR / NEXT
SIMPLE INSPECTION OF THE A/C PRESSURE SENSOR
  1. Assemble a manifold gauge onto the high pressure service valve.
  1. Turn ON the engine and then turn ON the air conditioner switch.
           
    1. Check to see that the voltage between the A/C pressure sensor terminal No.2 and body earth reflects the specifications of the Figure.
      2. NOTE: The allowance shall be defined as ± five percents.
    [55A] HEATER, AIR CONDITIONER AND VENTILATION - - ON-VEHICLE SERVICE - SIMPLE INSPECTION OF THE A/C PRESSURE SENSORPRINT PAGE / INDEX / PRIOR / NEXT
    ©2004 Mitsubishi Motors Corporation