Post-installation Operation
Headlamp Aiming Adjustment (Refer to  ). |
)
| Removal |
|||
|---|---|---|---|
<<A>> |
1. |
Headlamp assembly |
CAUTION)
| Removal steps |
|||
|---|---|---|---|
| • |
Front bumper assembly (Refer to GROUP 51, Front bumper assembly ). |
||
| 1. |
Headlamp body |
||
| 2. |
Socket cover |
||
| <<B>> |
3. |
Discharge headlamp connector |
|
| 4. |
Discharge headlamp controller |
||
| 5. |
Headlamp bulb |
REMOVAL SERVICE POINT
)
- Remove half of the front bumper assembling clips and bolts.
NOTE: The figure illustrates the procedures to remove the headlamp assembly (LH).
- Slide the front bumper down to remove the headlamp assembly.
)
Remove the position lamp bulb, and tie a rope to the end of the controller connector and pull it towards the bulb side.