)
| Removal steps |
|||
|---|---|---|---|
<<A>> |
>>A<< |
1. |
Side turn-signal lamp assembly |
| 2. |
Side turn-signal lamp |
||
| 3. |
Bulb |
||
| 4. |
Socket |
REMOVAL SERVICE POINT
)
Use a special tool ornament remover (MB990784), etc. to remove the side turn-signal lamp by pushing the fender forward, bending the hook, and then unclamping the thumb.
INSTALLATION SERVICE POINT
)
Clamp the thumb on the fender panel the assemble the side turn-signal lamp.