FUEL GAUGE UNIT RESISTANCE
)
- Check that resistance value between the fuel gauge terminal and earth terminal is at the standard value when the fuel gauge unit float is between position F (highest) and position E (lowest).
- Float position F : 3 ± 0.6 Ω
- Float position E : 110 ± 2.5 Ω
Standard value:
- Check that resistance value changes smoothly when the float moves slowly between position F (highest) and position E (lowest).
- If all checks are correct, go to fuel gauge unit float height check. If any check is not correct, replace the fuel gauge unit.
FUEL GAUGE UNIT FLOAT HEIGHT
)
- Move the float and measure height A at position F (highest) and B at position E (lowest) with the float arm touching stopper.
- Position F (A) : 35.4 mm ± 2 mm
- Position E (B) : 186.7 mm ± 2 mm
Standard value:
- If all checks are correct, go to fuel gauge unit float height check. If any check is not correct, replace the fuel gauge unit.