IGNITION SWITCH
 WARNING
  • Before removal of the air bag module, refer to GROUP 52B, SRS Service Precautions () and Air Bag Module and Clock Spring ().
  • When removing and installing the steering wheel, do not let it bump against the air bag module.
   



Removal steps
    1.
Instrument lower panel (Refer to GROUP 52A, Instrument panel assembly <L.H.drive vehicles> or <R.H.drive vehicles>)
    2.
Steering wheel (Refer to GROUP 37, Steering wheel <2000-SOHC and 2400> or <2000-DOHC>)
    3.
Column cover upper
    4.
Column cover lower
    5.
Clock spring and column switch assembly (Refer to GROUP 52B, Air bag module(s) and clock spring )
<<A>>
  6.
Steering lock cylinder
   
Ignition switch connector
    7.
Ignition switch
   
Key reminder switch connector


8.
Key reminder switch and ring assembly
    9.
Key reminder switch
    10.
Illumination ring


11.
Key reminder switch and bulb assembly


12.
Immobilizer-ECU

   
  1. Insert the key in the steering lock cylinder and turn it to the "ACC" position.
  1. Using a small Phillips head screwdriver, pull the steering lock cylinder toward you.
©2004 Mitsubishi Motors Corporation