DIAGNOSIS PROCEDURE
STEP 1. Check that the player works normally if the tape is changed.
NOTE: Check that the tape label is not loose, that the tape case is not deformed and that the tape is tightly wound. Also, tapes with a length of C-120 or greater can often get caught in the mechanism and should not be used.
Q: Does the player work normally if the tape is changed?
YES:
The tape used is defective.NO: Go to Step 2.
STEP 3. Check that the proper operation is obtained when the tape player is replaced.
Q: Is proper operation obtained when the tape player is replaced?
YES:
Replace the radio and tape player. The sound quality should return to normal.NO: Repair or replace the speakers. The sound quality should return to normal.