DIAGNOSIS PROCEDURE
STEP 1. Check that the tape player work normally when the tape is changed.
NOTE: Check that the tape label is not loose, that the tape case is not deformed and that the tape is tightly wound. Also, tape with a length of C-120 or greater can often get caught in the mechanism and should not be used.
Q: Does the player work normally if the tape is changed?
YES:
The tape used is defective. The cassette tape speed should be stable.NO: Go to Step 2
.STEP 2. Check that there are any foreign objects inside the tape player.
NOTE: Attempting to eliminate a foreign object (e.g., a coin or clip, etc.) out of the tape player may damage the mechanism. The player should be taken to a service dealer for repair.
Q: Are there any foreign objects inside the tape player?
YES:
The procedure is complete.NO: Go to step 3
.)
Q: Is the head or capstan roller dirty?
YES:
Clean the head or capstan roller. The cassette tape speed should be stable.NO: Repair or replace the tape player. The procedure is complete.