)
Disconnect ignition switch connector C-303 without removing the ignition switch. Then check the continuity.
| Switch position |
Tester connection |
Specified condition |
|---|---|---|
| "LOCK" (OFF) |
1 -
2, 1 -
3, 1 -
4, 1-
5, 1 -
6, 2 -
3, 2 -
4, 2-
5, 2 -
6, 3 -
4, 3-
5, 3 -
6, 4-
5, 4 -
6, 5 -
6 |
Open circuit |
| "ACC" |
1 -
6 |
Less than 2 ohms |
| "ON" |
1 -
2, 1 -
4, 1 -
6, 2 -
4, 2 -
6, 4 -
6 |
Less than 2 ohms |
| "START" |
1 -
2, 1 -
5, 2 -
5 |
Less than 2 ohms |
)
Disconnect key reminder switch connector C-304 without removing the ignition switch and key reminder switch. Then check the continuity.
| Status of ignition key |
Tester connection |
Specified condition |
|---|---|---|
| Removed |
4 -
6 |
Less than 2 ohms |
| Inserted |
4 -
6 |
Open circuit |