Tool
No.
Name
Application
    MB990784
Ornament remover
Removal of cover.
    MB990803
Steering wheel puller
Steering wheel disconnection
    MB991502
MUT-II sub assembly
  • Reading and erasing diagnosis code
  • Reading trouble period
  • Reading erase times
    MB991955
  • A: MB991824
  • B: MB991827
  • C: MB991910
  • D: MB991911
  • E: MB991825
  • F: MB991826
MUT-III sub-assembly
  • A: Vehicle Communication Interface (V. C. I.)
  • B: MUT-III USB cable
  • C: MUT-III main harness A (Vehicles with CAN communication system)
  • D: MUT-III main harness B (Vehicles without CAN communication system)
  • E: MUT-III measurement adapter
  • F: MUT-III trigger harness
Checking diagnosis codes
 CAUTION
If you connect MUT-III main harness A to a vehicle without CAN communication system to use the MUT-III, a pulse signal may interfere with the simulated vehicle speed lines, thus causing the MUT-III inoperative. Therefore, use the MUT-III main harness B (MB991911) instead.
    MB991865
Dummy resistor
SRS air bag and seat belt with pre-tensioner circuit check
    MB991866
Resistor harness
SRS air bag circuit check
    MB991884
Resistor harness (For Pre-tensioner)
Seat belt with pre-tensioner circuit check
    MB991885
Pre-tensioner adapter harness
  • Deployment of seat belt with pre-tensioner inside the vehicle
  • Deployment of seat belt with pre-tensioner outside the vehicle
    MB991223
A: MB991219
B: MB991220
C: MB991221
D: MB991222
Harness set
A: Test harness
B: LED harness
C: LED harness adapter
D: Probe
Checking the continuity and measuring the voltage at the SRS-ECU harness connector
    MB686560
SRS air bag adapter harness
  • Deployment of air bag module (Front passenger's side) inside the vehicle
  • Deployment of air bag module (Front passenger's side) outside the vehicle

©2004 Mitsubishi Motors Corporation