[52B] SUPPLEMENTAL RESTRAINT SYSTEM (SRS) - - FRONT IMPACT SENSORS - INSPECTIONPRINT PAGE / INDEX / PRIOR / NEXT
INSPECTION
 WARNING
 If a dent, crack, deformation or rust is detected, replace with a new sensor.
  1. Check the front impact sensor for dents, cracks, deformation or rust.
           
       WARNING
       Always replace the sensor with a new one if the resistance shows a short or open circuit.
    1. Check short or open circuit between the terminals of the front impact sensor.
      2. When short circuit: 1 Ω or less
      When open circuit: 2 MΩ or more
    1. Check the continuity between the terminal and bracket. If there is a continuity, the insulation is malfunctioned, and replace the sensor with a new one.
    1. Check the head lamp support pane for deformation and rust.
    [52B] SUPPLEMENTAL RESTRAINT SYSTEM (SRS) - - FRONT IMPACT SENSORS - INSPECTIONPRINT PAGE / INDEX / PRIOR / NEXT
    ©2004 Mitsubishi Motors Corporation