WARNING- Before removing the steering wheel and air bag module assembly, refer to GROUP 52B, Service Precautions (
) and Air Bag Module(s) and Clock Spring ().
- When removing and installing the steering wheel, do not let it bump against the air bag module.
Post-installation Operation
|
)
| Removal steps |
|||
|---|---|---|---|
<<A>> |
1. |
Cover |
|
| <<B>> |
2. |
Air bag module assembly |
|
| 3. |
Steering wheel mounthing nut |
||
| <<C>> |
4. |
Steering wheel |
|
| 5. |
Sub harness |
)
Insert special tool ornament remover (MB990784) at the indicated position to remove the cover.
NOTE: The special tool can be inserted through the notch behind the area shown.
)
- By sliding section A of the clock spring connector shown in the illustration in the arrow direction, disconnect the connector.
)
Use special tool MB990803 to remove the steering wheel.