WARNING- Before removing the steering wheel and air bag module assembly, refer to GROUP 52B, Service Precautions
and Air Bag Module(s) and Clock Spring .
- When removing and installing the steering wheel, do not let it bump against the air bag module.
Post-installation Operation
|
)
| Removal steps |
|||
|---|---|---|---|
<<A>> |
1. |
Cover |
|
| <<B>> |
2. |
Steering wheel and air bag module assembly |
|
| <<C>> |
3. |
Air bag module assembly |
|
| 2. |
Steering wheel |
)
- By sliding section A of the clock spring connector shown in the illustration in the arrow direction, disconnect the connector.
)
- By pushing tab of the steering shift switch connector shown in the illustration in the arrow direction, disconnect the connector.
)
- Loosen the bolt completely. Then, remove the steering wheel and air bag module assembly.
NOTE: Use a hexagonal bit socket or a hexagonal wrench having an effective length of 75 mm or more in the hexagonal section and the diameter of 8 mm or more.