)
| Disassembly steps |
|||
|---|---|---|---|
<<A>> |
>>A<< |
1. |
Special bolt |
| >>A<< |
2. |
Steering lock bracket |
|
| >>A<< |
3. |
Steering lock cylinder assembly |
|
| 4. |
Steering column shaft assembly |
DISASSEMBLY SERVICE POINT
)
- Drill in the special bolt a hole deep enough for the tap to stand.
- Remove the special bolt with a left-hand tap.
REASSEMBLY SERVICE POINT
>>A<<
STEERING LOCK CYLINDER ASSEMBLY/STEERING
LOCK BRACKET/SPECIAL BOLT INSTALLATION
CAUTION- When installing the steering lock cylinder assembly and steering lock bracket to the column tube, temporarily install the steering lock in alignment with the column boss.
)
- After checking that the lock works properly, tighten the special bolts until the head twists off.