CAUTION<2000-SOHC>
)
| Removal steps |
|||
|---|---|---|---|
>>B<< |
1. |
Stabilizer link connection |
|
| <<A>> |
2. |
Lower arm and trailing arm connection |
|
| 3. |
Shock absorber mounting nut |
||
| 4. |
Shock absorber and lower arm connecting bolt |
||
| >>A<< |
5. |
Shock absorber assembly |
<2000-DOHC and 2400>
)
| Removal steps |
|||
|---|---|---|---|
| 1. |
Stabilizer link connection |
||
| <<A>> |
2. |
Lower arm and trailing arm connection |
|
| 3. |
Shock absorber mounting nut |
||
| 4. |
Shock absorber and lower arm connecting bolt |
||
| >>A<< |
5. |
Shock absorber assembly |
)
After supporting the lower arm with a jack, separate the lower arm and trailing arm connection.
)
Install the spring seat stepped section so that it points towards the rear side of the vehicle.
)
Tighten the self-locking nut until the stabilizer link thread part protruding length meets the standard value.
Standard value (A): 6 -
8 mm