Post-installation Operation
|
<2000-SOHC>
)
| Removal steps |
|||
|---|---|---|---|
>>B<< |
1. |
Self-locking nut |
|
| 2. |
Stabilizer rubber |
||
| 3. |
Stabilizer link |
||
| >>A<< |
4. |
Fixture |
|
| >>A<< |
5. |
Bushing |
|
| >>A<< |
6. |
Stabilizer bar |
<2000-DOHC and 2400>
)
| Removal steps |
|||
|---|---|---|---|
| 1. |
Stabilizer link |
||
| >>A<< |
2. |
Fixture |
|
| >>A<< |
3. |
Bushing |
|
| >>A<< |
4. |
Stabilizer bar |
)
- Install the stabilizer bar, the bushings and the fixtures as illustrated.
<2000-DOHC and 2400>
)
)
- Install the stabilizer bar, the bushings and the fixtures so that the stoppers come inboard of the bushings.
)
Tighten the self-locking nut until the stabilizer link thread part protruding length meets the standard value.
Standard value (A): 6 -
8 mm